Skip to main content
Blog Hero

Explorer’s Circle

Welcome to the SPEE3D blog.


SPEE3D is Here to Compete with Casting, 3D Printing Metal at Thrice the Speed of Sound – Sarah Goehrke

Metal 3D printing systems tend to dominate headlines, especially as more players come into the game (and still more announce their intention to enter). The technology, as industry experts frequently underscore, is hot — at least as a topic, as today not all need high heat. Metals are an undeniable focus and growth factor in additive manufacturing, and took a great deal of attention at last week’s RAPID + TCT.

One interesting factor is that as more competitors bring metal capabilities to additive technologies, competition isn’t necessarily directly picking up. The various technologies falling under the umbrella of additive manufacturing each have best-fit application areas. Many developments are focusing on aerospace components and fine-resolution detail prints; Australia-based SPEE3D is looking to broader opportunities in commodity parts.

The high-speed metal 3D printing solution is focused on speed, cost, and repeatability and, as company CEO and Co-Founder Byron Kennedy told me when we met at RAPID + TCT last week, isn’t competing with most 3D printing companies. For SPEE3D, the competition is in casting. This traditional area is a prime target for many additive technologies, as 3D printing is set to disrupt sectors of the massive casting market.

“At three times the speed of sound, material sticks and creates full-density parts. The benefits are it’s very fast and is low cost. We don’t compete with most 3D printing companies; we make cast aluminium parts, fast, and at a low cost,” Kennedy explained as we looked into the LightSPEE3D machine with its six-axis KUKA robotic arm.

“To reduce costs, we don’t use any gases, just air. The only cost to run is power and powder, and we use a low-cost generic powder that pushes costs down. We compete with casting in terms of cost and speed.”

The system launched at formnext 2017, introducing its supersonic 3D deposition (SP3D) technology. Business is currently focused about half and half on work with aluminium and copper powders. This latter, Kennedy continued, is a very interesting focus and has driven many inquiries. A wall at the booth showcased 16 copper components that were 3D printed in 11 and a half minutes — for a cost of .25.

“Copper is very easy for us. It’s difficult to cast, requiring high temperatures; most people mill blocks,” he noted, which necessarily increases material costs. “We give the ability to make near-net parts; this is a new ability to do copper where there wasn’t before.”

So new is this capability that despite showing videos and being on-site at formnext and other previous events, people still didn’t believe it until they saw the process in action with their own eyes. To that end, the SPEE3D team ran demos throughout RAPID + TCT to show SP3D live. These had a strong turnout and continued to raise inquiries.

“We create practical parts. We’re targeting low-cost commodity parts. Our background is in manufacturing,” Kennedy continued.

“To our analysis, our break-even point is about 10,000 pieces when comparing costs to casting. Our niche is 1 to 10,000 pieces. Properties are the same as cast parts, with the same surface finish. Cast parts are the obvious market for us.”

The system is set to make every part of the process more efficient, in terms of not only manufacturing speed and costs, but operation. The user interface was designed to avoid the ‘clunkiness’ of similar systems, and its creators looked to the games industry to create a smoother setup. Working with the gaming department of a university, they developed a “very Netflix-style” menu created for ease of use and essentially touch-and-go operation. Kennedy showed me the process for getting to the files they were using for the on-site demos, and indeed it took just a few swipes of the screen and touches of well-labeled and easily distinguishable graphic options to get everything into place.

SPEE3D uses a cloud-based software for its process, with operations including part simulation, code generation, uploading, and ultimately hitting print. All, Kennedy explained, was “designed to be as user-friendly as possible.” The system itself is automated and “very easy,” as a side window in the machine lets the robotic arm put completed parts through to continue on to the next job.

Everything about this system was designed for production 3D printing, and it’s been grabbing a good deal of interest as it’s hit the market.

“We have shipped and are shipping to Germany, Singapore, the US, and Australia; our focus now is to get more machines onto the market. Some are going into research and new markets that we hadn’t thought of. The focus now is getting them into people’s hands and letting them get into uses we hadn’t thought of because we’re a machine manufacturer,” Kennedy said.

As the LightSPEE3D machines see more installations, SPEE3D is looking ahead. Next steps include scaling up, and Kennedy noted that that includes for the systems themselves: next year the team will introduce new machines, featuring a bigger bed and bigger robots.

Article by: Sarah Goehrke

SPEE3D is Here to Compete with Casting, 3D Printing Metal at Thrice the Speed of Sound